{"id":3765,"date":"2026-11-19T17:14:51","date_gmt":"2026-11-19T09:14:51","guid":{"rendered":"http:\/\/www.songs4learning.com\/blog\/?p=3765"},"modified":"2026-11-19T17:14:51","modified_gmt":"2026-11-19T09:14:51","slug":"what-materials-are-amorphous-cores-made-of-46bd-b919f9","status":"publish","type":"post","link":"http:\/\/www.songs4learning.com\/blog\/2026\/11\/19\/what-materials-are-amorphous-cores-made-of-46bd-b919f9\/","title":{"rendered":"What materials are amorphous cores made of?"},"content":{"rendered":"<p>If you\u2019ve ever worked with transformers, inductors, or power electronics, chances are amorphous cores played a quiet, critical role in making those devices efficient. As someone who\u2019s spent the last 12 years sourcing, testing, and supplying these cores to engineers, renewable energy teams, and automotive component makers, I\u2019ve lost count of how many times I\u2019ve been asked, \u201cWhat are amorphous cores made of, exactly?\u201d It\u2019s a question that goes far beyond a simple \u201cmetal mix\u201d\u2014the materials that go into these cores are tightly controlled, engineered to balance efficiency, durability, and cost in ways that make modern high-performance electronics possible. Let me break this down, from the core base materials to the precise manufacturing tweaks that set a quality amorphous core apart. <a href=\"https:\/\/www.magason-tech.com\/magnetic-core\/amorphous-core\/\">Amorphous Core<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.magason-tech.com\/uploads\/40335\/small\/surface-mount-inductors5761b.jpg\"><\/p>\n<p>First, let\u2019s start with the foundation: amorphous cores are almost entirely made of metal alloys, but not just any metal mix. Unlike traditional silicon steel cores (the go-to for most transformers for decades), amorphous cores are built from materials that don\u2019t form a regular crystalline structure when solidified. That lack of crystal structure is the secret to their superpower: much lower core loss, which means less energy wasted as heat and higher overall efficiency.<\/p>\n<p>The primary base material for nearly all commercial amorphous cores is iron, plain and simple. Iron has a natural magnetic permeability that\u2019s ideal for cores\u2014 it concentrates magnetic flux without requiring too much external energy to magnetize and demagnetize. But pure iron is too soft and too lossy for high-performance applications, so we add carefully measured amounts of other elements to tweak its properties. The two most common additions are silicon and boron. Silicon is added in amounts between 5% and 15% to improve the material\u2019s electrical resistance, which reduces eddy current losses (another source of core waste). Boron, meanwhile, makes up 5% to 20% of the alloy, and its key job is to lower the melting point of the mix enough to enable the rapid cooling process that locks in the amorphous structure. Without boron, the alloy would need to be heated to impossibly high temperatures to melt, and even then, cooling it fast enough to avoid crystal formation would be nearly impossible.<\/p>\n<p>Wait, but that\u2019s not the only mix. There\u2019s a lesser-known type of amorphous core called nanocrystalline cores, which use a slightly different alloy base. Nanocrystalline cores are a subset of amorphous materials, but they go a step further: after the initial rapid cooling to form an amorphous \u201cparent\u201d material, they\u2019re heat-treated to turn small regions of the metal into nanoscale crystals (hence the name). The base alloy for nanocrystalline cores usually adds elements like copper and niobium to the iron-silicon-boron mix. Copper helps nucleate tiny crystals, while niobium slows down crystal growth, ensuring the crystals stay small (typically 10 to 100 nanometers across) so they don\u2019t disrupt the amorphous matrix. These cores have even higher permeability and better high-frequency performance than standard amorphous cores, which makes them popular for things like switching-mode power supplies and high-frequency inductors.<\/p>\n<p>One question I get all the time: why not use other metals, like cobalt or nickel? Cobalt-based amorphous cores exist for very specialized applications, like aerospace components where extreme temperature stability is critical, but they\u2019re far more expensive than iron-based mixes, so they\u2019re not viable for most commercial or industrial use cases. Nickel-based amorphous cores are also a niche play, used mostly in sensors, not in the power transformers or inductors that make up the bulk of our business. At the end of the day, iron-based alloys strike the perfect balance of magnetic performance, cost, and availability, so they make up over 90% of the amorphous cores we supply.<\/p>\n<p>Now, it\u2019s not just the alloy mix that matters\u2014 the purity of the base materials is non-negotiable. Even tiny impurities, like 0.1% carbon or oxygen, can disrupt the amorphous structure during cooling, leading to crystal formation that kills the core\u2019s efficiency. That\u2019s why we source our base iron from mills that produce ultra-high-purity iron (99.9% or higher) and test every batch for trace elements before it even reaches our processing facility. We\u2019ve seen batches of alloy rejected because of a 0.08% spike in aluminum, which might sound trivial, but it\u2019s enough to make the core lose 10% more energy than it should. For a transformer running 24\/7 in a wind farm, that 10% difference translates to thousands of dollars in wasted energy over the core\u2019s lifespan.<\/p>\n<p>Once the alloy is mixed, the next step is the manufacturing process that turns it into a core, and that process is as critical as the material itself. The molten alloy is heated to around 1,200 to 1,400 degrees Celsius, then poured onto a spinning copper wheel rotating at speeds up to 1,000 meters per second. That rapid cooling rate\u2014 up to a million degrees per second\u2014 is what prevents the metal atoms from arranging into a crystalline pattern. Instead, they lock into a random, amorphous glass-like structure. The result is a thin ribbon of metal, just 20 to 30 micrometers thick (about half the thickness of a human hair). We then stack or wind these ribbons into the core shape needed for a specific application: a toroid for small inductors, a E-shape for power transformers, or a strip for grid-scale distribution cores.<\/p>\n<p>After the core is formed, we do a final heat treatment step to optimize its magnetic properties, without turning it crystalline. We heat the core to a temperature just below its crystallization point (usually around 400 to 500 degrees Celsius) in a controlled nitrogen atmosphere. This relieves internal stress from the manufacturing process, which makes the core more stable and improves its permeability. The atmosphere is important here\u2014 oxygen would react with the hot metal, forming oxides that hurt performance, so we use nitrogen to create an inert environment.<\/p>\n<p>Let me also clear up a common misconception: amorphous cores are often called \u201cmetal glass cores\u201d by engineers, and that\u2019s not just a marketing term. The random atomic structure is the same as glass, which is why the term sticks. Traditional steel cores have a regular, repeating atomic grid, which creates friction between atoms when the core is magnetized and demagnetized, leading to energy loss as heat. Amorphous cores\u2019 random structure eliminates that friction, so their core loss is 60% to 80% lower than silicon steel cores. That\u2019s a game-changer for efficiency, especially in devices that run continuously.<\/p>\n<p>Now, as an amorphous core supplier, I\u2019ve seen a lot of customers assume all amorphous cores are the same, but that\u2019s far from true. The material mix isn\u2019t the only variable\u2014 the ratio of elements, the purity, the cooling rate during ribbon production, and the final heat treatment all change the core\u2019s performance. For example, a core designed for a 50Hz power transformer (used in grid distribution) will have a slightly different alloy mix than one designed for a 100kHz EV on-board charger. The high-frequency core needs lower eddy current loss, so we adjust the boron content to improve electrical resistance, and use a thinner ribbon (20 micrometers instead of 30) to cut down on those losses.<\/p>\n<p>We also work with customers who need ultra-high-temperature amorphous cores for applications like aerospace generators or downhole oil and gas equipment. For those, we adjust the alloy mix to add small amounts of chromium, which improves corrosion resistance and raises the crystallization temperature, so the core stays amorphous even at temperatures up to 300 degrees Celsius, where standard iron-silicon-boron cores would start to degrade.<\/p>\n<p>If you\u2019re reading this, chances are you\u2019re an engineer, a product designer, or a procurement manager looking to improve the efficiency of your power electronics. Whether you\u2019re building a small consumer inductive charger or a 10MW grid transformer, the material of your amorphous core isn\u2019t just a technical detail\u2014it\u2019s what will determine how efficient your product is, how long it lasts, and how much it costs to operate over its lifespan. For us, this isn\u2019t just about selling a core; it\u2019s about matching the right material mix and manufacturing process to your specific application, so you get the performance you need.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.magason-tech.com\/uploads\/40335\/small\/ferrite-rod-bar7a08a.jpg\"><\/p>\n<p>If you\u2019re looking to upgrade your current core technology or source high-quality amorphous cores for your next project, we\u2019re here to help. We work with all kinds of applications, from small consumer electronics to heavy industrial equipment, and we can help you choose the right material and core design for your needs. Reach out to our team to discuss your requirements, ask questions about material specs, or request a sample for testing. We\u2019ll walk you through every step, from material selection to delivery, to make sure you get a core that meets your exact needs.<\/p>\n<p><a href=\"https:\/\/www.magason-tech.com\/power-inductor\/air-coil\/\">Air Coil<\/a> References<\/p>\n<ol>\n<li>Luborsky, F.E. (1983). Amorphous Metallic Alloys. Butterworths.<\/li>\n<li>McHenry, M.E., Laughlin, D.E. (2007). \u201cNanocrystalline Soft Magnetic Alloys.\u201d Progress in Materials Science, vol. 52, no. 1, pp. 1-91.<\/li>\n<li>Energy Efficiency and Renewable Energy Office (2021). Amorphous Core Transformers: Technology and Applications. U.S. Department of Energy.<\/li>\n<li>Liebermann, H.H. (1995). \u201cRapidly Solidified Amorphous and Nanocrystalline Alloys for Magnetic Applications.\u201d Journal of Magnetism and Magnetic Materials, vol. 149, no. 1-2, pp. 15-24.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.magason-tech.com\/\">Shaanxi Magason-Tech Electronics Co., Ltd.<\/a><br \/>Shaanxi Magason-Tech Electronics Co., Ltd. is one of the most professional amorphous core manufacturers and suppliers in China. If you&#8217;re going to buy high quality amorphous core at competitive price, welcome to get free sample from our factory. Also, customized service is available.<br \/>Address: Room #1901, Building No.D, Chanba Financial Center, No.2566 JinQiao 2nd Road, Chanba District, Xi&#8217;an City, Shaanxi Province. Zip Code: 710032<br \/>E-mail: sales@magason-tech.com<br \/>WebSite: <a href=\"https:\/\/www.magason-tech.com\/\">https:\/\/www.magason-tech.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019ve ever worked with transformers, inductors, or power electronics, chances are amorphous cores played a &hellip; <a title=\"What materials are amorphous cores made of?\" class=\"hm-read-more\" href=\"http:\/\/www.songs4learning.com\/blog\/2026\/11\/19\/what-materials-are-amorphous-cores-made-of-46bd-b919f9\/\"><span class=\"screen-reader-text\">What materials are amorphous cores made of?<\/span>Read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":3765,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3728],"class_list":["post-3765","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-amorphous-core-4124-b94e56"],"_links":{"self":[{"href":"http:\/\/www.songs4learning.com\/blog\/wp-json\/wp\/v2\/posts\/3765","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.songs4learning.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.songs4learning.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.songs4learning.com\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"http:\/\/www.songs4learning.com\/blog\/wp-json\/wp\/v2\/comments?post=3765"}],"version-history":[{"count":0,"href":"http:\/\/www.songs4learning.com\/blog\/wp-json\/wp\/v2\/posts\/3765\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.songs4learning.com\/blog\/wp-json\/wp\/v2\/posts\/3765"}],"wp:attachment":[{"href":"http:\/\/www.songs4learning.com\/blog\/wp-json\/wp\/v2\/media?parent=3765"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.songs4learning.com\/blog\/wp-json\/wp\/v2\/categories?post=3765"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.songs4learning.com\/blog\/wp-json\/wp\/v2\/tags?post=3765"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}