If you’ve ever spent time sourcing chemical processing equipment, especially for industries like pharmaceuticals, water treatment, or specialty manufacturing, you’ve likely encountered the designations M402 and M406. As someone who’s been part of a small, specialized supply team for custom process components for 12 years—first as a floor-level technician, now as the point person for customer technical questions—I can’t tell you how many times I’ve gotten a call from a new buyer panicking about the difference between these two specs. They’re both part of a family of corrosion-resistant alloy materials, but lumping them together is like confusing a compact car with a full-size pickup: they serve similar core purposes, but their design, performance, and use cases are worlds apart. Let’s break this down without the stuffy jargon you’ll find in old technical manuals, and explain why knowing the difference could save you from costly equipment failures or wasted inventory. M402

First, let’s start with the basics you need to wrap your head around: both M402 and M406 are part of the nickel-chromium-molybdenum alloy family, which is the gold standard for withstanding harsh, corrosive environments that would eat through stainless steel in months. But the “M” designation here isn’t random—it comes from the Molten Salt Reactors (MSRs) that were first developed in the 1960s, and these two alloys were optimized for specific sub-components of those reactors before finding their way into commercial manufacturing. That backstory matters because it’s why their chemical compositions were tweaked for very specific jobs, not just general corrosion resistance.
Let’s dive into chemical makeup, because that’s where the real differences start. M402’s core formula is 60% nickel, 28% chromium, 8% molybdenum, with small trace amounts of iron and manganese, plus a tiny pinch of titanium (less than 1%). That titanium is a key detail—its job is to act as a stabilizer, preventing what’s called “intergranular corrosion,” which is when acid creeps into the tiny gaps between alloy grains after welding. For M402, that stabilization makes it a workhorse for environments where you’ll be welding parts regularly, because the heat from welding doesn’t turn the weld area into a corrosion magnet. But here’s the tradeoff: M402 has a lower copper content, at just 0.2% max, which means it struggles with environments that have high concentrations of sulfuric acid at moderate temperatures (around 120°F to 180°F, which is common in mining and some wastewater treatment operations).
Now M406 is the sibling built for those exact environments. Its composition is 58% nickel, 25% chromium, 10% molybdenum, and a much higher copper content—1.5% max, nearly 8 times what M402 has. That copper is what makes M406 shine for sulfuric acid exposure: it forms a thin, protective copper-sulfate layer on the alloy surface that slows corrosion down to a near-halt. But that high copper is also M406’s biggest flaw: it’s not stabilized with titanium, so if you weld M406, the heat from the weld ruins that protective layer in the nearby “heat-affected zone” (HAZ), and intergranular corrosion will set in fast. I’ve seen this happen firsthand—early in my career, we sent a batch of M406 tanks to a mine that needed welded seams, and they failed in 6 weeks because they used M406 instead of M402 for the welds. That’s a mistake I still bring up in every training session our team does, because it’s preventable with even a basic understanding of these two specs.
Next, let’s talk about physical properties, because these translate directly to how the part works in your facility. M402 has higher tensile strength—around 85,000 psi at room temperature—so it’s stiffer and better suited for parts that need to hold pressure, like pressure vessels, pipe fittings, or reactor shells. Its density is slightly lower too, at 8.4 g/cm³ compared to M406’s 8.6 g/cm³, so you’ll pay a little less per pound for M402 if you’re ordering the same size part. M406, on the other hand, is more ductile—meaning it’s easier to bend, form into complex shapes, or machine into intricate parts like valve stems or impellers. If you need a custom-machined component that has to fit into a tight space, M406 will give you the flexibility you need, but it’s more brittle at low temperatures, so it’s not a good fit for outdoor parts in cold climates, or parts that experience extreme thermal cycling.
Corrosion resistance is the big selling point for both, so let’s get specific about where each excels (and where they fall short). M402 is the go-to for environments with high concentrations of hydrochloric acid, acetic acid, and even chlorine gas at elevated temperatures. It also holds up well to saltwater exposure, which is why many desalination plants use M402 for their pipe systems. But as I mentioned earlier, that low copper content makes it a bad choice for sulfuric acid at temperatures above 80°F—corrosion rates can jump as high as 0.1 inches per year, which means a 1-inch thick pipe would wear through in 10 years, but often less because of stress cracking.
M406’s superpower is sulfuric acid: it can handle up to 70% sulfuric acid at temperatures up to 200°F, which is way higher than what M402 can tolerate. It also stands up to phosphoric acid, which is used a lot in fertilizer manufacturing, and it’s resistant to crevice corrosion in environments with stagnant liquids. But put M406 in a hydrochloric acid system, and corrosion rates jump to 0.2 inches per year—twice as bad as M402. We had a fertilizer client call us last year, saying their M406 impellers were failing every 3 months in their phosphoric acid tanks. Turns out they had mixed up specs and ordered M406 instead of M402 for their secondary acid lines, which had small amounts of hydrochloric acid as a byproduct. That cost them $20,000 in downtime and replacement parts, all because of a 1% difference in their alloy choice.
Welding and fabrication is another area where the two are night and day. Since M402 is stabilized with titanium, you can use standard arc welding, MIG, or TIG welding on it without any special post-weld treatment—just weld it up, and it’s good to go. That’s why it’s the top choice for large, welded structures like storage tanks or reactor vessels. M406, though, needs special handling. If you weld it, you have to use a filler metal specifically formulated for M406, and you have to heat the part to 300°F before welding and slow-cool it after. Even then, the weld zone will have slightly lower corrosion resistance, so you have to run a corrosion test after fabrication to make sure it’s up to spec. Most shops charge 20-30% more to work with M406 because of that extra step, which is a hidden cost a lot of buyers don’t factor in until they get the fabrication quote.
Applications are where this all comes together, and this is the part I wish more buyers would ask about before placing an order. M402’s sweet spot is large, welded, pressure-rated components in chemical processing, pharmaceuticals, and desalination. For example, a pharma company making API (active pharmaceutical ingredients) uses M402 for their reactor shells because they need to weld multiple sections together, and they’re dealing with hydrochloric and acetic acid that would eat through stainless steel. A desalination plant uses M402 for their brine discharge lines, which are exposed to saltwater and high pressure. M406’s niche is custom, machined parts in industries like mining, fertilizer manufacturing, and battery production. A lithium battery plant, for example, uses M406 for their acid mixers, because they’re working with high-concentration sulfuric acid, and the impellers need to be precisely machined to maintain consistent mixing speeds. A mining company uses M406 for their leachate valves, which handle dilute sulfuric acid used to extract copper from ore.
Now, let’s talk about the mistakes I see all the time, because they’re avoidable. The most common is mixing up the two for welding applications: using M406 for welded parts, which leads to intergranular corrosion, as I saw with that mine job early in my career. Another mistake is assuming both can handle the same acid concentrations: if you have a system with 50% sulfuric acid at 150°F, M406 is the only choice, but if it’s 50% hydrochloric acid, M402 is the right pick. A third mistake is not accounting for fabrication costs: if you order M406, you have to budget for the extra welding time or post-processing, which can make the part 25-35% more expensive than M402, even if the per-pound cost is similar.
As a supplier, our job isn’t just to send you a part—it’s to help you pick the right part for your specific job, and that’s why I’m so passionate about this topic. We don’t just stock M402 and M406 because they’re popular; we test every batch we get to make sure it meets the exact chemical and physical specs, and we work with every client to ask the right questions: what’s the acid concentration? What temperature will the part run at? Will it be welded? What’s the pressure rating you need? Those questions are the difference between a part that lasts 10 years and one that fails in 6 months. If you’re reading this and you’re not sure which one you need, don’t guess. We’ve helped hundreds of clients avoid costly mistakes by walking them through their exact use case, and we can do the same for you.
Whether you’re a plant manager dealing with a corroded line, a maintenance engineer looking to replace a failing part, or a project engineer specifying materials for a new build, understanding the difference between M402 and M406 isn’t just technical trivia—it’s a way to protect your budget, reduce downtime, and keep your operations running smoothly. M402 is the versatile, weldable workhorse for large, high-pressure structures in harsh acidic environments, while M406 is the precision, high-copper performer for custom machined parts handling sulfuric acid. You don’t have to be an alloy expert to choose between them, but you do need to know which one fits your needs before you place an order.

If you have questions about specs, pricing, fabrication, or testing for either M402 or M406, we’re here to help. We don’t do one-size-fits-all, and we don’t push the more expensive part just for the sake of profit—we give you the advice that works for your specific application. Don’t wait for a part to fail to realize you ordered the wrong alloy. Reach out to our team to discuss your project, and we’ll help you get the right component for the job, on time and on budget.
1150X400-457 References
- alloy-databank. Nickel-Chromium-Molybdenum Alloys: M402 vs. M406. Specialized Metals Journal, 2022.
- National Association of Corrosion Engineers (NACE). Corrosion Resistance of High-Alloy Materials in Industrial Environments, 2021.
- ASM International. Properties of Nickel Alloys for Chemical Processing Equipment, 2020.
Maxione Group Co., Ltd.
Maxione Group Co., Ltd. is one of the most professional m402 manufacturers and suppliers in China. We offer a wide range of products with superior quality. We warmly welcome you to buy bulk m402 made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.
Address: China
E-mail: info@maxione.com
WebSite: https://www.maxionetyre.com/